262-694-9748
Bone Dry EM Coating
VOC free epoxy modified surface coating
In Stock
No Wrinkling- No yellowing from UV exposure
- Will extend the service life of exterior surface 10+ years
- Pencil hardness (surpasses 6H)
- Excellent resistance to rainwater ingress, freeze/thaw conditions, and environmental wear & tear
- Provides a semi gloss appearance
- Excellent stain prevention on existing concrete and brick
- Indoor
- Outdoor
- Commercial
Important Documents:
SDS
Advanced Bone Dry Epoxy Modified Surface Coating
Bone Dry EM Coating is a VOC-free, 2-part epoxy-modified surface coating with exceptional chemical resistance. Designed for industrial environments, it withstands exposure to manufacturing fluids, gasoline, anti-freeze, brake fluid, solvents, salts, acetone, alcohol and standing water. Our em coating delivers unmatched durability against scratching and forklift traffic while bonding securely to concrete and existing sealers.
What are Modified Epoxy Sealers?
Epoxy surface coats are an innovative approach to traditional sealers. Bone Dry EM Coating is engineered to increase flexibility, minimize shrinkage, raise peel strength and provide extreme resistance in high-traffic conditions. We combine classic epoxy elements with strategic performance enhancements.
Key Advantages of Bone Dry EM Coating
- FDA 117.1390 approved for direct contact with food
- No required concrete grinding
- Excellent heat resistance
- Prevents wrinkling
- Maintains slip resistance
- Resistant to forklift traffic
- Achieves pencil hardness surpassing 6H
- Resists gasoline, motor oil, anti-freeze, brake fluid and alkaline cleaners
- Contains no polyisocyanate
- Convenient spray application
Competitive Pricing Advantage
Our modified epoxy surface coating delivers exceptional value. Priced at a maximum of $0.50 per square foot versus standard epoxy systems averaging $5.50 per square foot, we provide an unmatched cost-effective solution.
Ideal Applications for EM Coating
Choose the premier alternative to traditional epoxy surface coating systems for affordable, long-lasting surface protection. Perfect for warehouses, manufacturing facilities, food processing plants and packaging environments.
Concrete Floor Preparation
| Steps | |
| Remodeled Surfaces |
|
| Newly Cured Concrete Surfaces |
|
How to Apply Bone Dry EM Coating
Required Equipment: Power drill with mixing paddle, application tools (sprayer or roller)
Application Steps:
- Clean concrete thoroughly, removing dust and debris
- Powerwash surface if needed (use Bone Dry Degreaser for tough stains)
- Mix part B into part A using a drill and paddle
- Apply using a sprayer: One coat with slight overlap, fully wet concrete
- Apply using roller: Wet roller, spread product uniformly
- Allow sealer to dry overnight before foot traffic
- Wait 48 hours before vehicle traffic
- Clean tools immediately after use
Application Methods
Bone Dry EM Coating can be applied using a ¼” nap roller, pump sprayer or battery-powered sprayer.
Application Using Roller
Using a paint tray, soak the roller and roll the product onto the surface. Only 1 coat is required. Allow the product to dry for 48 hours before allowing foot traffic. As the product cures a white discoloration will occur which will dissipate within 48 hours. Allow the product to cure 72 hours before allowing vehicle traffic.
Application Using Sprayer
Using a pump or battery-powered sprayer, apply 1 coat liberally with a 50% overlap. Allow the product to dry for 48 hours prior to allowing foot traffic. As the product cures a white discoloration will occur which will dissipate within 48 hours. Allow the product to cure 72 hours before allowing vehicle traffic.
FAQ's
What is the pot life of Bone Dry EM Coating?
Two hours.
What is the spread rate of Bone Dry EM Coating?
300 square feet per gallon.
How can I store extra Bone Dry EM Coating?
Store unmixed product in a conditioned space between 35 to 96 degrees Fahrenheit.
Can I freeze unmixed Bone Dry?
NO. Do not freeze this product.
