Bone Dry Li 200 Polish

Li 200 Polish

Bone Dry Li 200 Polish is a high solid content Lithium densifier. Application of Li 200 Polish will allow contractors to achieve their desired sheen quicker and will less labor. With the assistance of surface tension modifiers, this product is formulated to penetrate deep into concrete and enhance the ability to polish concrete slabs. Concrete slabs polished using Li 200 Polish will have increased hardness, abrasion resistance, water and stain resistance, ASR (Efflorescence) Protection, an increased sheen.

Product Specifications

• Water Based
• 0 VOC (VOC Free)\
• Allows for easy polishing of concrete surfaces
• Protects against Efflorescence (ASR)
• Eliminates Dusting
• For Interior and Exterior Use
• Densifies and Hardens Concrete
• Improves Water and Stain Resistance
• Breathable and UV Stable
• Increases Abrasion Resistance
• Fills Microcracks and Increases Sheen

How To Apply Li 200 Polish

Apply the Li 200 Polish by fully wetting the concrete slab and avoid puddling. If puddling occurs use a push broom to spread the product. The slab should remain wet for 10-15 minutes. Once the product has become dry to the touch continue grinding the slab until the desired polish has been achieved.

Importance of Protecting Finished Surfaces

Any finished surfaces such as cabinetry, glass, finished metal surfaces, and finished painted areas must be masked off with plastic up to 2 feet from the concrete to prevent overspray from causing discoloration. Painted areas affected by overspray can be repainted to address any discoloration.