Bone Dry EM Coating
Price range: $125.00 through $395.00
Epoxy modified surface coating intended for light to moderate traffic and food grade environments.
Key Features
- No Wrinkling
- No yellowing from UV exposure
- Will extend the service life of exterior surface 10+ years
- Pencil hardness (surpasses 6H)
- Excellent resistance to rainwater ingress, freeze/thaw conditions, and environmental wear & tear
- Provides a semi gloss appearance
- Excellent stain prevention on existing concrete and brick
Use
- Indoor
- Outdoor
- Commercial
Important Documents
Description
Industrial floors live under chemistry. Gasoline, brake fluid, acetone, antifreeze — bare concrete drinks all of it, and every spill becomes a permanent stain or a slow attack on the slab. Bone Dry EM Coating is the armor layer: a two-component, epoxy-modified surface coating with a clear semi-gloss finish, exceptional chemical resistance, and antimicrobial protection built in — engineered for food processing, warehousing, and packaging environments.
Tap to enlarge
The spill lineup: what the coating stands up to
Seven regulars of the industrial floor — gasoline, antifreeze, brake fluid, acetone, solvents, salts, and alcohol — sit on top of the semi-gloss EM Coating and none get through to the concrete. Clear, VOC-free, antimicrobial: wipe it and move on.
Epoxy, modified
Classic epoxy is hard but brittle. EM Coating combines those classic epoxy elements with strategic performance enhancements: increased flexibility, minimized shrinkage, and raised peel strength, in a scratch-resistant, VOC-free formula. The result is a clear, semi-gloss barrier that keeps floors looking new and pristine — and shrugs off the fluids that ruin ordinary surfaces.
What it does for the floor
| Function | What it means in service |
|---|---|
| RESISTS | Exceptional resistance to gasoline, antifreeze, brake fluid, solvents, salts, acetone, alcohol |
| BLOCKS | Seals the surface against water infiltration and standing water |
| GUARDS | Antimicrobial properties for facilities where hygiene is specified |
| FINISHES | Clear semi-gloss, scratch-resistant — floors stay clean and pristine |
| FLEXES | Epoxy-modified: more flexibility, less shrinkage, higher peel strength |
The exposure list
| Exposure | Result |
|---|---|
| Gasoline | Withstands exposure |
| Antifreeze | Withstands exposure |
| Brake fluid | Withstands exposure |
| Solvents | Withstands exposure |
| Acetone | Withstands exposure |
| Alcohol | Withstands exposure |
| Salts | Withstands exposure |
| Standing water | Withstands exposure — blocks infiltration |
Built for food-grade floors
Tap to enlarge
Food-grade floors: cleanup by squeegee
On food-grade floors, the day’s spill sits on top of the coating — one pass of the squeegee and it’s done, with antimicrobial protection built into the coating beneath every wipe.
EM Coating is engineered specifically for dry food processing, warehousing, and packaging environments — facilities where the floor has to satisfy both the sanitation audit and the forklift schedule. Spills sit on the coating instead of soaking the slab, so cleanup is a wipe rather than a remediation, and the antimicrobial formula keeps working underneath it all. Rated for light to moderate traffic.
Inside and out
Tap to enlarge
Semi-gloss finish
EM Coating leaves a semi-gloss finish: floors that read as new, resist scratching, and let stains wipe off — interior and exterior.
The same clear coat that survives an acetone spill also handles the seasons: outdoors, EM Coating protects exposed surfaces from environmental staining and discoloration — leaf decay, dirt, water runoff — and resists seasonal weathering. It bonds to bare concrete, and Bone Dry’s coating line extends the same protection to wood and cement surfaces.
Where it fits in the family
| You need | Use |
|---|---|
| A finished, chemical-resistant wearing surface — semi-gloss, food-grade | EM Coating |
| A coating over a slab already sealed with Bone Dry | Not EM Coating — it is a stand-alone product and is not compatible with Bone Dry sealers |
| Invisible moisture sealing beneath flooring | Bone Dry Pro, Original, or Plus |
| Exposed concrete with a natural matte look, heavy traffic | Li 200 Logistics |
Application
Tap to enlarge
How it goes down: two components, five moves
Part A (resin) + Part B (hardener) → mix per label directions → roll on over bare concrete → in service, food-grade ready. Two components; stand-alone — not over Bone Dry sealers.
Good to know: EM Coating is a two-component product — mix Part A and Part B per the label directions and apply to clean, dry surfaces. EM Coating is a stand-alone product and is not compatible with Bone Dry sealers: apply it to bare, clean, dry concrete, not over a slab that has been sealed.
Technical data
| Type | Two-component epoxy-modified surface coating |
| Finish | Clear, semi-gloss, scratch-resistant |
| Chemical resistance | Gasoline, antifreeze, brake fluid, solvents, salts, acetone, alcohol |
| Hygiene | Antimicrobial properties |
| VOC | VOC-free |
| Traffic | Light to moderate |
| Environments | Dry food processing, warehousing, packaging — interior and exterior |
| Bonds to | Bare concrete — stand-alone; not compatible with Bone Dry sealers |
Specifying a floor that has to pass the audit and the spill? Send us the square footage and the exposure list — we’ll size the EM Coating order. Call 262-694-9748 or email [email protected].
FAQ
What is the pot life of Bone Dry EM Coating?
Two hours.
How long does it take Bone Dry EM Coating to cure?
72 hours.
What is the spread rate of Bone Dry EM Coating?
300 square feet per gallon.
How can I store extra Bone Dry EM Coating?
Store unmixed product in a conditioned space between 35 to 96 degrees Fahrenheit.
Can I freeze unmixed Bone Dry?
No, do not freeze this product.
What chemicals does EM Coating resist?
Gasoline, antifreeze, brake fluid, solvents, salts, acetone, and alcohol all sit on top of the coating without reaching the concrete, and it seals the surface against water infiltration and standing water.
Can EM Coating go over a slab already sealed with Bone Dry?
No. EM Coating is a stand-alone product and is not compatible with Bone Dry sealers.
Is EM Coating suitable for food-grade floors and outdoor use?
Yes. It is engineered for dry food processing, warehousing, and packaging environments, with antimicrobial protection built in and a clear semi-gloss finish that lets spills wipe off. It is VOC-free, rated for light to moderate traffic, and works interior and exterior.
Specifications
Read more about the specifications here.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 1 Gallon, 5 Gallon, 55 Gallon Drum |
