Bone Dry EM Coating
Price range: $125.00 through $395.00
Two-part epoxy-modified surface coating for wet and dry food processing, warehousing and packaging floors; a stand-alone coating, not for use over Bone Dry sealers.
Key Features
- No Wrinkling
- No yellowing from UV exposure
- Will extend the service life of exterior surface 10+ years
- Pencil hardness (surpasses 6H)
- Excellent resistance to rainwater ingress, freeze/thaw conditions, and environmental wear & tear
- Provides a semi gloss appearance
- Excellent stain prevention on existing concrete and brick
Use
- Indoor
- Outdoor
- Commercial
Important Documents
Description
Industrial floors live under chemistry. Gasoline, brake fluid, acetone, antifreeze — bare concrete drinks all of it, and every spill becomes a permanent stain or a slow attack on the slab. Bone Dry EM Coating is the armor layer: a two-component, epoxy-modified surface coating with a clear semi-gloss finish, exceptional chemical resistance, and antimicrobial protection built in — suited for wet and dry food processing, warehousing, and packaging facilities. It is a stand-alone coating: apply it to bare concrete, never over a Bone Dry sealer.
Tap to enlarge
The spill lineup: what the coating stands up to
Seven regulars of the industrial floor — gasoline, antifreeze, brake fluid, acetone, solvents, salts, and alcohol — sit on top of the semi-gloss EM Coating and none get through to the concrete. Clear, VOC-free, antimicrobial: wipe it and move on.
Epoxy, modified
Classic epoxy is hard but brittle. EM Coating combines those classic epoxy elements with strategic performance enhancements: increased flexibility, minimized shrinkage, and raised peel strength, in a scratch-resistant, VOC-free formula. The result is a clear, semi-gloss barrier that keeps floors looking new and pristine — and shrugs off the fluids that ruin ordinary surfaces.
What it does for the floor
| Function | What it means in service |
|---|---|
| RESISTS | Exceptional resistance to gasoline, antifreeze, brake fluid, solvents, salts, acetone, alcohol |
| BLOCKS | Seals the surface against water infiltration and standing water |
| GUARDS | Antimicrobial properties for facilities where hygiene is specified |
| FINISHES | Clear semi-gloss, scratch-resistant — floors stay clean and pristine |
| FLEXES | Epoxy-modified: more flexibility, less shrinkage, higher peel strength |
The exposure list
| Exposure | Result |
|---|---|
| Gasoline | Withstands exposure |
| Antifreeze | Withstands exposure |
| Brake fluid | Withstands exposure |
| Solvents | Withstands exposure |
| Acetone | Withstands exposure |
| Alcohol | Withstands exposure |
| Salts | Withstands exposure |
| Standing water | Withstands exposure — blocks infiltration |
Built for food-grade floors
Tap to enlarge
Food-grade floors: cleanup by squeegee
On food-grade floors, the day’s spill sits on top of the coating — one pass of the squeegee and it’s done, with antimicrobial protection built into the coating beneath every wipe.
EM Coating is suited for wet and dry food processing, warehousing, and packaging facilities — floors that have to satisfy both the sanitation audit and the forklift schedule. Spills sit on the coating instead of soaking the slab, so cleanup is a wipe rather than a remediation, and the antimicrobial formula keeps working underneath it all. Per the specification sheet, its durability resists scratching, forklift traffic, and seasonal weathering, and the sheet lists “FDA 177.1390: Approval for direct contact with food” under Testing.
Inside and out
Tap to enlarge
Semi-gloss finish
EM Coating leaves a semi-gloss finish: floors that read as new, resist scratching, and let stains wipe off — interior and exterior.
The same clear coat that survives an acetone spill also handles the seasons: outdoors, EM Coating protects exposed surfaces from environmental staining and discoloration — leaf decay, dirt, water runoff — and resists seasonal weathering. It bonds to bare concrete, and Bone Dry’s coating line extends the same protection to wood and cement surfaces.
Where it fits in the family
| You need | Use |
|---|---|
| A finished, chemical-resistant wearing surface — semi-gloss, food-grade | EM Coating |
| A coating over a slab already sealed with Bone Dry | Not EM Coating — it is a stand-alone coating and is not for use over Bone Dry sealers |
| Invisible moisture sealing beneath flooring | Bone Dry Pro, Original, or Plus |
| Exposed concrete with a natural matte look and no film | Li 200 Logistics |
Application
Tap to enlarge
How it goes down: two components, five moves
Coating + catalyst (coupling agent) → mix 3–5 minutes with a drill paddle → two coats on bare concrete by roller or sprayer → foot traffic at 48 hours, vehicle traffic at 72 hours. Two components; stand-alone — not over Bone Dry sealers.
Good to know: EM Coating is a two-component product. Per gallon, mix 119 fl oz of coating with 9 fl oz of catalyst (the coupling agent) using an electric drill mixing paddle for 3–5 minutes; pot life is 6 hours. Apply two coats with a ¼-inch nap roller, pump sprayer, or battery-powered sprayer, letting the first coat dry to the touch and turn clear before the second. New concrete should cure 28 days before application; existing surfaces need loose debris and peeling coatings removed. Allow 48 hours before foot traffic and 72 hours before vehicle traffic; a white discoloration in the first 6–12 hours dissipates as the coating clears. EM Coating is a stand-alone coating and is not for use over Bone Dry sealers: apply it to bare, clean, dry concrete, not over a slab that has been sealed with Bone Dry Pro, Original, Plus or any other Bone Dry sealer.
Technical data
| Type | Two-component epoxy-modified surface coating |
| Finish | Clear, semi-gloss, scratch-resistant |
| Chemical resistance | Gasoline, antifreeze, brake fluid, solvents, salts, acetone, alcohol |
| Hygiene | Antimicrobial properties |
| VOC | VOC-free |
| Traffic | Resists scratching and forklift traffic (per the specification sheet); foot traffic after 48 hours, vehicle traffic after 72 hours |
| Environments | Wet and dry food processing, warehousing, packaging — interior and exterior |
| Mix ratio | 119 fl oz coating to 9 fl oz catalyst per gallon; pot life 6 hours |
| Spread rate | 300–350 sq ft per gallon, two coats |
| Cure | 72 hours (foot traffic at 48 hours; white discoloration during the first 6–12 hours clears) |
| Storage | Unmixed, sealed container, 40–85 °F; do not freeze |
| Testing (per the specification sheet) | FDA 177.1390: Approval for direct contact with food; Hot Seal Test: 446 F at 45 psi – pass; Pencil Hardness: greater than 6H; Shore D Hardness: 80; Konig (Pendulum): 163 seconds; Chemical Resistance: 150 Double Rubs – MEK, Acetone, Isopropyl Alcohol: Pass; Contains NO polyisocyanate |
| Bonds to | Bare concrete — stand-alone coating; not for use over Bone Dry sealers |
Specifying a floor that has to pass the audit and the spill? Send us the square footage and the exposure list — we’ll size the EM Coating order. Call 262-694-9748 or email info@bonedryproducts.com.
FAQ
What is the pot life of Bone Dry EM Coating?
Six hours after the coating and catalyst are mixed.
How long does it take Bone Dry EM Coating to cure?
72 hours. Allow 48 hours before foot traffic and 72 hours before vehicle traffic; a white discoloration during the first 6 to 12 hours dissipates as the coating clears.
What is the spread rate of Bone Dry EM Coating?
300 to 350 square feet per gallon, applied in two coats.
How can I store extra Bone Dry EM Coating?
Store unmixed product in its sealed container in a conditioned space between 40 and 85 degrees Fahrenheit.
Can I freeze unmixed Bone Dry?
No, do not freeze this product.
What chemicals does EM Coating resist?
Gasoline, antifreeze, brake fluid, solvents, salts, acetone, and alcohol all sit on top of the coating without reaching the concrete, and it seals the surface against water infiltration and standing water.
Can EM Coating go over a slab already sealed with Bone Dry?
No. EM Coating is a stand-alone coating and is not for use over Bone Dry sealers. Apply it to bare, clean, dry concrete.
Is EM Coating suitable for food-grade floors and outdoor use?
Yes. It is suited for wet and dry food processing, warehousing, and packaging facilities, with antimicrobial protection built in and a clear semi-gloss finish that lets spills wipe off. It is VOC-free, resists scratching and forklift traffic, and works interior and exterior. Its specification sheet lists “FDA 177.1390: Approval for direct contact with food” under Testing.
Specifications
Read more about the specifications here.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 1 Gallon, 5 Gallon, 55 Gallon Drum |
